.

Tigar Majmun Ptice Drvo Skinuti Visine Mjera Zid Naljepnice za Djecu Sobu 867 Zid Preslikač Kući Decals Rast Visine Naljepnice

Tigar Majmun Ptice Drvo Skinuti Visine Mjera Zid Naljepnice za Djecu Sobu 867 Zid Preslikač Kući Decals

KM 47.60

Dostupnost
Dostupno za naručivanje

Generalno važećim : zid citati naljepnice može biti prijavila za kući dekoraciju u dnevnoj sobi, spavaća, kupatilo, kuhinja, TV-u pozadini, ili druga prilika kao što je učionicu, u vrtiću, kaligrafiju sobu, uredu, kafiću što.Sigurnost za Djecu : Napravljen od eko vinil, mastilo i ljepilo, sadrže non-otrovno i miris besplatno, držeći svoju djecu daleko od hemikalije koje štete.Lako Peel Pretjeruje tvoj sredine sa te nalepnice će donijeti prijatno trenutak za tebe.Stilu : modern Category : pločice, zidovi, nameštaj naljepnice, pod naljepnice, prozor stickers Pattern : Stan Zid Sticker Specification : jedan package Model : Zid Sticker Scene : Wall Features : zaštitu okoline, otporan na vodu..Materijal : Vinil zid sticker Category : zid, pločice, prozor sticker100% novo i visoko quality Material : Vinil PVC zid sticker Easy koristiti : izabrati glatko, čiste i suhe površinu.Da gulimo naljepnice jedan po jedan.Mjesto je ljepilo na plohi bez pritiska ih tako da to može biti izvukao i biti izmeštene.Ako je efekt je zadovoljavajuće, pritisni balon napolje da ga dovede bliže površini.Preslikač je lako ukloniti, ali ne može biti ponovo iskoristiti/replacedhow koristiti : 1. Pripremite svoje škare, noževe i karte.2. Pastu za transfer film na dizajn.3. Ogrebotinu na kartici više navrata da izbjegne mehurići vazduha.4. Stavi dizajn i film na površini displej, a onda pažljivo ukloniti prijenos film.

O proizvodu

single package :
Model:
Wall Sticker
Scene:
Wall
Features:
environmental protection, waterproof...
Material:
Vinyl wall sticker
Category:
wall, tile, window sticker
100% brand new and high quality :
Material:
Vinyl PVC wall sticker
Easy to use:
choose a smooth, clean and dry surface.
Peel off the stickers one by one. Place the adhesive on a flat surface without pressing them so that it can be pulled out and repositioned. :
If the effect is satisfactory, press the bubble outward to bring it closer to the surface. :
The decal is easy to remove, but cannot be reused/replaced :
how to use:
1. Prepare your own scissors, knives and cards. :
2. Paste the transfer film onto the design. :
3. Scratch the card repeatedly to avoid air bubbles. :
4. Put the design and film on the surface of the display, and then carefully remove the transfer film. :