.

125Khz Em4100 Mini 125Khz Rfid Kopirku Rewritable Komercijalne Pristup Kontrolu Duplikator + Keyfob Kopirku Čitač

125Khz Em4100 Mini 125Khz Rfid Kopirku Rewritable Komercijalne Pristup Kontrolu Duplikator + Keyfob Kopirku

KM 0.00

Dostupnost
Dostupno za naručivanje

Id Kopirku Rewritable - Ova Naprava Je Nekada Kopiju I Duplikat 125 Khz Em4100 Ličnu Kartu Za Pojačanje Svrhu.Odlično Program Algoritam I Circuit Dizajna Su Usvojili.Možeš Kopirati Sve Id(Em4100) Kartice Sa Ovim Rfid Kopirku.Id Keyfobs Oznake - Usvojen Napredne Čip, Proizvod Integracije Je Više, Više Stabilno I Pouzdan.Odlično Program Algoritam I Circuit Dizajn Smanjiti Potrošnja Energije I Produžiti Baterije.Rfid Duplikator Programer - Usvojen Napredne Čip, Proizvod Integracije Je Više, Više Stabilno I Pouzdan.Odlično Program Algoritam I Circuit Dizajn Smanjiti Potrošnja Energije I Produžiti Baterije.Čitač Rfid Pisac Ključ Čitanje Udaljenost Može da dopre Do 2.5 Cm, I Karticu Može da dopre Do 6 Cm.Karte : T5577 Em4305 Cet5200 I Sve T5577, Em4305 Kompatibilni Kartice.Kopirku Mini Ručnim - Korišćena U Zajednici, Školu, Ured I Drugi Pristup Kontrolu Trebao Mjesta.Specifikacija : Uslov : 100% Potpuno Nov Materijal : Plastične Boja : Pokazala kao slika Veličine : 117 * 70 * 30mm / 4.6 * 2.8 * 1.2 u Dugme : Pročitao Dugme, Pišem Dugme Energije : 2 komad AAA bateriju, to mogu replicirati 20 tisuća puta.Paket Težinu : Povrsine. 89g / 3.1 oz Paket Uključuje : 1 * RFID Kopirku (Baterije nisu uključeni) 1 * Keyfob Korištenja način : Početi replikator 1. Pritisneš prekidač na desnoj strani replikator gore, crveno svjetlo se uvijek, zeleno svjetlo i žutog svetla koje je video zvono zvuči, što ukazuje da je start-up je uspješna, inače može biti obnovljen jednom. 2. Kada replikator počinje, na ovaj put ne pročitaj neku karticu, i onda pritisneš replikator kliknite da napiše poruku, možeš napisati karticu u puni nula ID karticu, pišem uspješno, zvono signala.Kopija LIČNU kartu 1. Pritisneš prekidač na desnoj strani duplikator gore, duplikator beep, zeleno svjetlo i žutog svetla koje je bljeskovi ukazuju na to da je start-up je uspješna. 2. Stavimo staru karticu na lijevoj strani replikator, pritisni ostavila ključ u replikator čitati karton, i čitač imas 2 puta da ukazuju na to da je kartica je pročitao uspješno i zeleno svjetlo je u isto vrijeme. 3. Promjena novi karticu, pritisnite prava dugme za replikator da napiše poruku, i čitač krpelja 2 puta da ukazuju na to da je kartica je uspješno i u žuto svetlo je upaljeno, to klon kartica je napravio.

O proizvodu

Condition:
100% Brand New
Material:
Plastic
Color:
Shown as picture
Size:
117 * 70 * 30mm / 4.6 * 2.8 * 1.2in
Button:
Read Button, Write Button
Power supply:
2 piece AAA battery, it can be replicated 20 thousand times.
Package Weight:
Approx. 89g / 3.1oz
Package Included:
1 * RFID Copier (Batteries are not included) :
1 * Keyfob :
Usage method:
Start the replicator :
1. Push the switch on the right side of the replicator up, the red light is always on, the green light and yellow light flashes, the buzzer sounds, indicating that the start-up is successful, otherwise it can be restarted once. :
2. When the replicator starts, at this time do not read any card, and then press the replicator right-click to write the card, you can write the card into a full zero ID card, write successfully, buzzer beep. :
Copy ID card :
1. Push the switch on the right side of the duplicator up, the duplicator beeps, the green light and the yellow light flashes to indicate that the start-up is successful. :
2. Put the old card on the left side of the replicator, press the left key of the replicator to read the card, and the reader beeps 2 times to indicate that the card is read successfully and the green light is on at the same time. :
3. Change a new card, press the right button of the replicator to write the card, and the reader ticks 2 times to indicate that the card is successful and the yellow light is on, so that a clone card is made. :